DIN 2391 Thin Wall Seamless Steel Tubes
Product Details
| Application: | Fluid Pipe | Delivery Condition: | Annealed|Normalized|Tempered|Heat Treatment|BK|BKS|BKW|NBK|GBK |
|---|---|---|---|
| Grade: | T4|St45|St 35|St 52|St 30 Al | Product Name: | Seamless Steel Tubes |
| Section Shape: | Round | Standard: | DIN 2391 |
| Surface Treatment: | Oil-dip|Varnish|Phosphating|Passivation|Shot Blasting | Technique: | Seamless |
| Highlight |
Seamless Steel Fluid Pipe,6m Seamless Steel Tubes,Annealed Steel Tubes Fluid Pipe |
||
Product Description
DIN 2391 St 30 Si / St 30 Al Thin Wall Seamless Steel Tubes Length 6m , 9m , 12 , 24m
DIN 2391 Thin Wall Seamless Steel Tubes Fluid Pipe Length 6m Annealed
ST30AL is mainly used for the production of seamless precision steel pipes and precision welded steel pipes.
| Standard | DIN 2391 |
| Grade | St 30 Si / St 30 Al / St 35 / St45 / St 52 |
| Out Dimensions | Out Dimensions |
| Wall Thickness | 0.8 mm ~30mm |
| Length | Fixed(6m,9m,12,24m) or normal length(5-12m) |
| Delivery Condition | Heat treatment,Annealed, Normalized, Normalized and Tempered |
| Packing | Beveled/black painting/ plastic caps/ in bundles/ steel strips/ wooden protection |
| Inspection and Test | Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength, Yield Strength,Elongation, Flaring, Flattening, Bending, Hardness, Impact Test),Surface and Dimension Test,Nodestructive Test, Hydrostatic Test. |
| Surface treatment | Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting |
Chemical Composition
Steel grade | Chemical composition, as a percentage by mass | |||||
Symbol | Material number | C | Si | Mn | P | S |
St 30 Si | 1.0211 | 0.10 | 0.30 | <=0.55 | 0.025 | 0.025 |
St 30 Al | 1.0212 | 0.10 | 0.05 | <=0.55 | 0.025 | 0.025 |
St 35 | 1.0308 | 0.17 | 0.35 | <=0.40 | 0.025 | 0.025 |
St 45 | 1.0408 | 0.21 | 0.35 | <=0.40 | 0.025 | 0.025 |
St 52 | 1.0580 | 0.22 | 0.55 | <=1.60 | 0.025 | 0.025 |
The following alloying elements may be added: Nb: <=0,03%; Ti: <=0,03%; V: <=0,05%; Nb + Ti + V: <=0,05%. | ||||||
Final supply conditions
Designation | Symbol | Description |
Cold finished (hard) | BK | Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation. |
Cold finished (soft) | BKW | The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding). |
Cold finished and stress-relieved | BKS | Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree. |
Annealed | GBK | The last cold forming process is followed by annealing in a controlled atmosphere. |
Normalized | NBK | The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere. |
Condition on delivery
Steel Grade | BK | BKW | GBK | NBK | ||||
Code No. | Tensile | Elongation | Tensile | Elongation at rupture N/mm2 min | Tensile | Elongation at rupture N/mm2 min | Tensile | Elongation at rupture N/mm2 min |
St30 Si | 400 | 8 | 330 | 12 | 280 | 30 | 290-420 | 30 |
St30 Al | 400 | 8 | 330 | 12 | 280 | 30 | 290-420 | 30 |
St 35 | 440 | 6 | 370 | 10 | 315 | 25 | 340-470 | 25 |
St 45 | 540 | 5 | 470 | 8 | 390 | 21 | 440-570 | 21 |
St 52 | 590 | 4 | 540 | 7 | 490 | 22 | 490-630 | 22 |
Other Terms
Scope: This standard defines the technical delivery conditions for seamless precision steel tubes according to DIN 2391 Part 1 which are made from the steel grades listed in section. Tubes according to this standard are mainly used where accuracy to dimension and possibly, small wall thickness and good surface condition are required.
Shape: The tubes shall be furnished in the following shapes, as specified by the purchaser: round, square,rectangular and special sections.
Product Photo
Factroy Pictures
Pipe & Tube Processing
Quality Control
Package
Export Standard / Wooden Box
Main Certificates
FAQ
Product Highlights
DIN 2391 St 30 Si / St 30 Al Thin Wall Seamless Steel Tubes Length 6m , 9m , 12 , 24mDIN 2391 Thin Wall Seamless Steel Tubes Fluid Pipe Length 6m AnnealedST30AL is mainly used for the production of seamless precision steel pipes and precision welded steel pipes.StandardDIN 2391GradeSt 30 Si / St 30 ...
En10305-1 Shock Absorber Precision Seamless Steel Pipe For Boiler Seamless Tube
En10305-1 Shock Absorber Precision Seamless Steel Pipe For Boiler Seamless Tube Seamless Precision steel tubes To be used in hydraulic system, automobile and precision machinery parts for cars and cylinder. Product Name Seamless Steel Pipe Tube Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Length Length:Single random length/Double random length 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual requirys Standard JIS G3466, EN 10219, GB/T 3094-2000,
ASTM 35# 304 316 20MnG Hot Rolled Boiler Steel Rectangular Round Pipe 6M Lehgth
ASTM 35# 304 316 20MnG Hot Rolled Boiler Steel Rectangular Round Pipe 6M Lehgth Its applications include transportation of oil,gas or fluid,Construction,Electricity,Machine building industy,Chemical industy,Petroleum,Traffic, etc. Product Name Hot Rolled / Hot expansion Seamless Carbon Steel Pipe O.D 60.3mm-914.4mm W.T 3.91mm-59.54mm Process method Hot rolled/ Hot expansion/ Cold drawn Length 5-12m as per customer's requirements Material 53, A106 Grade B, A106 Grade C, Q235,
Hot Rolled Thick Wall Steel Tube
Seamless Hot Rolled Thick Wall Steel Tube For Mechanical St52 DIN1629 / DIN2448 Q345 With good quality and competitive price, we believe we could be your reliable supplier. Its applications include transportation of oil,gas or fluid,Construction,Electricity,Machine building industy,Chemical industy,Petroleum,Traffic, etc. Product Name Hot Rolled / Hot expansion Seamless Carbon Steel Pipe Brand WUXI SILAISHI O.D 20mm-950mm W.T 4mm-60mm Technique Hot rolled/ Hot expansion/ Cold
Precision Cold Drawn Seamless Steel Tubes A333 Grade 6 For Heat-Exchanger Systems
Precision Cold Drawn Seamless Steel Tubes A333 Grade 6 For Heat-Exchanger Systems Product Description There shall be no cracks, folds, cracks, cracks, folds, delaminations and scarring defects on the inner and outer surfaces of the steel pipe. These defects shall be completely removed (except for pipes for machining). After removal, the wall thickness and outer diameter shall not exceed negative bias. Other minor surface defects that do not exceed the allowable negative
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
