ASTM A179 Seamless Carbon Stainless Steel Pipe 320 A192M 316L For Aviation Boiler
The seamless steel pipe is made by perforating the whole round steel, and the steel pipe without weld seam on the surface is called seamless steel pipe. According to the production method, seamless steel pipes can be divided into hot-rolled seamless steel pipes, cold-rolled seamless steel pipes, cold-drawn seamless steel pipes, extruded seamless steel pipes, and pipe jacking. According to the cross-sectional shape, seamless steel tubes are divided into two types: round and special-shaped, and special-shaped tubes have various complex shapes such as square, oval, triangular, hexagonal, melon-shaped, star-shaped, and finned tubes. The maximum diameter is up to 900mm and the minimum diameter is 4mm. According to different purposes, there are thick-walled seamless steel pipes and thin-walled seamless steel pipes. Seamless steel pipes are mainly used as petroleum geological drilling pipes, cracking pipes for petrochemical industry, boiler pipes, bearing pipes, and high-precision structural steel pipes for automobiles, tractors, and aviation.
Product Description
| Product Name | Carbon steel pipe/tube |
| Thickness | 0.5mm - 120mm |
| Out diameter | 9.5mm - 1200mm |
| Length | 6M/12M and any length workable |
| Size | 1/8 inch to 24 inch |
| Standard: | ASTM 5L, ASTM A53, ASTM A178, ASTM A500/501, ASTM A691, ASTM A252, ASTM A672, EN 10217 |
| Grade | 10#-45#, 16Mn, A53-A369, Q195-Q345, ST35, ST52, API 5L: PSL1/PSL2, Gr.A, Gr.B, X42, X46, X52, X56, X60, X65, X70 |
| Section Shape | round, squre, rectagular, Outer hexagon, Inner hexagon and so on |
| Capacity | 8000 tons/month |
| Package | Bevel + anti-corrosion paint + pipe cap + steel strapping or bare packing |
| Surface coating | PE, SMP, HDP, PVDF |
| Surface treatment | Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE) |
| Delivery time | 10-35 days after receive payment |
| QC | 1) inspect round bar or steel plate quality before production |
| 2) Always a pre-production sample before mass production | |
| 3) Always final Inspection before shipment | |
| 4) Laboratory analysis, pressure testing, flaw detection | |
| 5) The third party inspection is accepted |
|
Standards
|
|
|
ASTM A53 Gr.B
|
Black and hot-dipped zinc-coated steel pipes welded and seamless
|
|
ASTM A106 Gr.B
|
Seamless carbon steel for high temperature service
|
|
ASTM SA179
|
Seamless cold-drawn low-carbon steel heat exchanger and condenser tubes
|
|
ASTM SA192
|
Seamless carbon steel boiler tubes for high pressure
|
|
ASTM SA210
|
Seamless Medium-carbon boiler and superheater tubes
|
|
ASTM A213
|
Seamless alloy-steel boiler, superheater, and heat-exchanger tubes
|
|
ASTM A333 GR.6
|
seamless and welded carbon and alloy steel pipe intended for use at low temperatures.
|
|
ASTM A335 P9,P11,T22,T91
|
Seamless ferritic alloy-steel pipe for high-temperature service
|
|
ASTM A336
|
Alloy steel forgings for pressure and high-temperature parts
|
|
ASTM SA519 4140/4130
|
Seamless carbon for mechanical tubing
|
|
API Spec 5CT J55/K55/N80/L80/P110/K55
|
Seamless steel pipe for casing
|
|
API Spec 5L PSL1/PSL2 Gr.b, X42/46/52/56/65/70
|
Seamless steel pipe for line pipe
|
|
DIN 17175
|
Seamless steel tube for elevated temperture
|
|
DN2391
|
Cold drawn seamless prevision pipe
|
|
DIN 1629
|
Seamless circular unalloyed steel tubes subject to special requirements
|
| Technique | Hot Rolled/Cold Drawn |
| Steel grades | Q195, Q235A-B, Q345A-E, 20#, 10#,16Mn, ASTM A36,ASTM A500, ASTM A53, ASTM 106, SS400, St37, St52, S235JR, S355TRH ect. |
| Standards | GB/T 3091-2001,GB/T13912-2002, BS 1387, ASTM F1083 ect. |
| Pipe ends | plain, beveled, threaded, socket with holes, with PVC clap/ coupling/ clamp, or as customers' requirement |
| treatment | |
| Application | liquid delivery (pump well, gas, water), construction pipe, structural pipe(greenhouse structure, fence post), curtain wall, machinery part ect. |
| Delivery Time | 10days from stock; 15-20days produced according to the qty |
| Payment Term | T/T or L/C |
| Price Term | CIF; CFR; FOB |
Chemical components & mechanical properties
| Standard | Grade | Chemical Components (%) | Mechanical Properties | ||||||
| ASTM A53 | C | Si | Mn | P | S | Tensile STrength(Mpa) | Yield STrength(Mpa) | ||
| A | ≤0.25 | - | ≤0.95 | ≤0.05 | ≤0.06 | ≥330 | ≥205 | ||
| B | ≤0.30 | - | ≤1.2 | ≤0.05 | ≤0.06 | ≥415 | ≥240 | ||
| ASTM A106 | A | ≤0.30 | ≥0.10 | 0.29-1.06 | ≤0.035 | ≤0.035 | ≥415 | ≥240 | |
| B | ≤0.35 | ≥0.10 | 0.29-1.06 | ≤0.035 | ≤0.035 | ≥485 | ≥275 | ||
| ASTM SA179 | A179 | 0.06-0.18 | - | 0.27-0.63 | ≤0.035 | ≤0.035 | ≥325 | ≥180 | |
| ASTM SA192 | A192 | 0.06-0.18 | ≤0.25 | 0.27-0.63 | ≤0.035 | ≤0.035 | ≥325 | ≥180 | |
Product Details
Product Application
Certificate
Packing and Shipping
Our company
Wuxi Sylaith Special Steel Co., Ltd. was established on January 30, 2010. It is a large-scale stainless steel circulation enterprise integrating processing and trade. It is located in Wuxi, Jiangsu, which is known as the land of fish and rice. It has obvious geographical advantages and convenient transportation. The company has a production, processing and logistics distribution base of more than 100,000 square meters. It has fully introduced international advanced modern automatic processing equipment, and took the lead in passing ISO9001 certification in the same industry, forming one of the largest stainless steel production bases in the country.
FAQ
Q1: ARE YOU FACTORY OR TRADER?
A1: Wuxi Sylaith Special Steel Co.,Ltd is a manufacturer of steel pipe and tube since 2010. We've gained our Export Right and become an integrated company of industry and trade in order to satisfy buyer's multi-request on different material and products.
Q2: WHICH MATERIAL/PRODUCTS YOU CAN PROVIDE?
A2: Seamless Stainless Steel Pipe / Tube, Seamless Carbon Stainless Steel Pipe /Tube,Galvanized Steel Tube witn any Shape and Welded pipes can also be available
Q3: HOW TO GET A SAMPLE?
A3: FREE samples are available for your checking and testing. And to get free samples, you need to send us you detailed receiving address (including post code) and your DHL/FedEx/UPS account for collecting samples, courier cost will be paid in your side.
Q4. CAN YOU PRODUCE THE PRODUCTS ACCORDING TO MY OWN DRAWINGS?
A4: Yes, we can produce the products according to your drawings that will be most satisfy you.
Q5: HOW TO VISIT YOUR FACTORY?
A5: Most of the main cities have flights to Shanghai; you can take flight to Shanghai Putong/Hongqiao International Airport.
If you come from Hongkong, it will take 2 hours by flight (every day 5 flight around noon time).
